主要性能Main Performance

极压抗磨性优异，负载能力高，在苛刻作业条件下对齿轮具有突出的抗擦伤保护，防止烧结和减少磨损，延长设备使用寿命。

良好的热氧化安定性，能在较高温度下使用，油品使用寿命长。

分水性能好，能迅速与接触的水分离。

良好的防腐、防锈能力，对齿轮不起腐蚀作用，良好的抗泡沫性。

Extreme pressure and excellent abrasion resistance, high load capacity, operating in harsh conditions on the gear of a prominent anti-abrasion protection, prevention and reduction of wear sintering, extended equipment life.

Good thermal oxidation stability, can be used at higher temperatures, oil long life.

Watershed performance, and can quickly contact with the water separation.

Good anti-corrosion, rust-proof capability, the gear can not afford to corrosion, good anti-bubble of.

主要用途The main purpose

本产品适用于要求使用符合美国AGMA250.04EP和USS224规格工业齿轮油的场合。适用于重负荷、冲击负荷等苛刻条件下工作的齿轮装置的润滑。例如钢铁、水泥、矿山、化肥、制糖等设备中具有重负荷（齿面接触应力大于1100Mpa)的齿轮传动装置的润滑。循环式或油浴式的润滑方式均适合。

This product applicable to require the use of the United States AGMA250.04EP and USS224 industrial gear oil specifications of occasions. Applicable to heavy-duty, shock loading to work under harsh conditions, such as the installation of gear lubrication. Such as steel, cement, mining, chemical fertilizer, sugar, and other equipment in a heavy-duty (tooth contact stress is greater than 1100 Mpa) of gear transmission lubrication. Circular or lubricating oil bath-style methods are suitable for.

注意事项Attention

使用本产品时，必须先把润滑系统清洗干净，避免污染新油。不得与其它油品混用，不能用于有色金属部件的场合。

Use of this product, it must first clean lubrication system to prevent new oil pollution. Shall not be mixed with other oil products, non-ferrous metal parts can not be used for the occasion.

执行标准The implementation of standards

GB5903-95之L-CKD，粘度等级按40℃运动粘度分为100、150、220、320、460、680共六个牌号。

GB5903-95 of the L-CKD, viscosity grade by 40 ℃ kinematic viscosity 100,150,220,320,460,680 divided into a total of six grades.